The Advanced Security Module/ASM (formerly referred to as an Exterior Door Kit or EDK) has two status LEDs.
Located on the side towards the Pure IP Reader-Controller’s pigtail.
A red LED indicates 12VDC power is being supplied to the ASM.
Communication Status LED:
Located on the side towards the lock wiring.
LED status meanings are described in the table below.
|Pure IP Reader Controller Locked||Pure IP Reader Controller Unlocked||Lock State when Pure IP Reader Controller is Unlocked||Description or Item to Check|
|Flash Amber||Flash Amber||No Operation||Yellow wire may be disconnected.|
|OFF||Flash Amber||No Operation||White wire may be disconnected.|
|OFF||Flash Amber||No Operation||Invalid encryption key received from Pure IP Reader-Controller.|
|OFF||OFF||No Operation||If power cycle of Pure IP Reader-Controller allows for one or more lock operations, and then the lock stops operating, then the BackEMF diode may not be installed correctly.|