The ISONAS Hardware Configuration Tool is a program that allows an installer to configure ISONAS devices to connect to Pure Access. This application can be downloaded from the quick links on our website or by simply clicking here.

The tool broadcasts out on the local network to discover ISONAS hardware. Once found, the reader controllers/bridges can then be configured to connect to Pure Access.

The following articles will detail how to do this.

Additional Hardware Resources (optional)

For information on how to install RC-03’s and IP-Bridges (including LED status information and jumper configuration), please review these PDF documents:

  1. RC-03 Installation
  2. IP-Bridge Installation

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.