Using the Mobile Credential to Unlock a Door

ISONAS Pure Mobile App

1. When a user approaches an ISONAS hardware device, they must have Bluetooth® Low Energy (BLE) as well as location services turned on in order for the phone to communicate with the ISONAS hardware.
2. Open the ISONAS Pure Mobile app on your mobile device.
3. When in range, touch the TAP TO SEND button.
   Note: The mobile app will show that the reader is in range when they are in close proximity, then it will show “Connecting” as the reader and phone try to connect. At this time the LED on the reader should turn amber (yellow).
4. The mobile app will show that the credential has been sent. If the user has been granted access, the LED will turn green and the door will unlock. If they do not have access, the LED will turn red.

Schlage Mobile App

1. When a user approaches a Schlage hardware device, they must have Bluetooth® Low Energy (BLE) as well as location services turned on in order for the phone to communicate with the hardware.
2. Open the Schlage Mobile app on the mobile device.
3. When in range, touch Tap to Unlock.