Configuration Settings

Important: The following configuration settings are not available for every device.

• First Person In (Engage devices only): Unlike ISONAS legacy devices, Engage wireless locks and the Schlage RC are not able to utilize the “Auto-Unlock w/ Badge” schedule type, but they have a similar function called “First Person In.”
  • In order for a credential to trigger an Auto Unlock on a device with the First Person In setting enabled, that credential must be active on the device. For wireless locks and the Schlage RC, this means that a user must have grant access privileges to the device via a schedule that is separate from the Auto Unlock rule, since Auto Unlock rules do not allow specification of users or user groups.
• Door Sense: enables/disables a connected door position sensor
• Latch Interval: duration with which the lock will remain unlatched on admit/approve
• Tamper: enables/disables the tamper sensor in the device
• Tamper Sensitivity (Engage devices only): controls the sensitivity of the tamper alarm
• Fail Modes: Fail Safe or Fail Secure
• ASM: enable this slider if access point is tied to an Advanced Security Module
• REX: enables/disables a connected REX (Request to Exit) peripheral
  • REX drop-down box: choose the action that occurs when someone triggers the REX switch
• AUX: enables/disables a connected AUX (Auxiliary) peripheral
  • AUX drop-down box: choose the action that occurs when someone triggers the AUX switch
• Beeper: enables/disables beeper sounds
• Beeper Sounds: select which events trigger the beeper to sound
• Keypad: enables/disables the keypad
• Keypad Backlight: enables/disables persistent keypad backlight
• Keypad Back Light Timeout (Engage devices only): the number of seconds the keypad backlight will stay illuminated after a button is pressed
• Lock On Close: enable this slider to lock the door when the door is closed (requires a door position sensor)
• Lock On Open: enable this slider to lock the door when the door is opened (requires a door position sensor)
• Check-In Settings (Schlage devices communicating via WiFi Only): Use this to configure the check-in frequency*. You can use a daily schedule and have the device check in anywhere from every 1 hour to every 24 hours. You can use a weekly schedule and only have the device check in at specific times on specific days of the week.

*Check-In Frequency refers to how often a Schlage device will wake up and communicate with Pure Access via it’s WiFi connection. When a device check-in occurs it will receive updated device settings and access control configuration from Pure Access as well as report its activity history.