Using the Configuration Tool

Download the latest version of the Configuration Tool. Note that you will need a Windows PC to run this application.

Clicking on will find any ISONAS devices on the local area network. If no devices are discoverable, you will need to ensure that the configuration tool is being run on a system that is on the same subnet as the readers/bridges.

Here is how the list will look once populated with discovered devices:

*If you are not able to find the devices on the network, see the Discovering Units section.

Clicking on “Connectivity Test” will determine if the network segment that the Configuration Tool is running on can make a connection to Pure Access.

The default test will determine if there is a path to communicate with Pure Access Cloud over the internet:

If the devices were discovered, proceed to Advanced Configuration to continue setting up the controllers.