Standard History Events

Icon	Event	Event Description
	Schedule	Device has been set to return to the scheduled weekly rules.
	Approve	User presented a credential that has been accepted.
	Admit	An admit has been sent from a dashboard widget.
	Unlocked	An access point was set to an unlocked state from the dashboard.
	Auto-Unlock	An auto-unlock schedule has started.
	Badge Unlock	An Auto-Unlock w/ Badge rule has started.
	Decline Credential Not Found	Presented credential has not been accepted (ensure the weekly rules have been configured properly)
	Decline Outside Schedule	Presented credential has access to this reader but not at the time the credential was read (too early or too late, see the current rule’s schedule).
	Decline Tamper	A credential is declined because there is a tamper alert.
	Device Connect	The device has connected to the software.
	Device Disconnect	The device has lost connection to the software.
	Compile Send	New/Updated information has been sent to all access points.
	Compile Complete	New/Updated information has been sent to all connected access points.
	Compile Failed	Some or all information was not able to reach the reader.
	Credential Sent to Reader	The user is configured for access in the software, but an update had not been pushed/received so the credential has been sent to the reader as a partial compile.
	Locked Down	A lockdown of access points has been activated.
	Lockdown Ended	Reader has been set back to the current schedule and is no longer locked down.
	Decline Lockdown	Credential has been declined because access point is currently locked down.
	REX Admit	There was a REX event on the device, unlocking the door unless set to “REX w/o Unlatch.”
	AUX Admit	AUX admit occurred from an input button tied into the device.
	Status Only	Command sent to reader unrelated to active process.
	Reader Error	Hardware error (the Coldfire and Coprocessor firmware may be mismatched). Please contact support if this persists.
	Internal Error	Hardware error. Please contact support if this persists.
	Offline	The virtual device has been deactivated.

*The name System Admin is a generic system profile that will not appear in the users’ list but will appear for certain events. This indicates that an action has occurred which does not have an administrator or cardholder associated with it. Such events include Device Connect, Device Disconnect, Auto-Unlock, REX Admit, Credential Sent to Reader, etc.