Importing Users into Pure Access Cloud (Engage linked tenant)

Importing Users into Pure Access Cloud (non-Engage tenant)

Importing Users into Pure Access Manager

When a tenant is linked with Engage, all of the steps from the previous article still apply. There is, however, additional credential information that must be taken into consideration so that the badges/fobs can be added successfully.

In the user import template CSV, the additional parameters are:

CardFormat (column F)
Hotstamp (column G)
FacilityCode (column I)
IssueLevel (column J)

The required fields for adding credentials to an Engage linked tenant are dependent upon the card format(s) that are being imported.

The chart below can be used to assist with filling out the user import CSV file:

Card Format Name	CardFormat	CredentialType	Hotstamp	BadgeId	FacilityCode	IssueLevel
26A (26 bit)	2	1		[REQUIRED]	[REQUIRED]
28G	27	1		[REQUIRED]	[REQUIRED]
28H	28	1		[REQUIRED]
32K	36	1		[REQUIRED]	[REQUIRED]	32
32X	30	1		[REQUIRED]
33D	25	1		[REQUIRED]	[REQUIRED]
34N	33	1		[REQUIRED]	[REQUIRED]
34S	41	1		[REQUIRED]	[REQUIRED]
35C	13	1		[REQUIRED]	[REQUIRED]
35X	42	1		[REQUIRED]	[REQUIRED]
36B	38	1		[REQUIRED]	[REQUIRED]
36C	39	1		[REQUIRED]	[REQUIRED]
36L	34	1		[REQUIRED]	[REQUIRED]
36M	37	1		[REQUIRED]	[REQUIRED]
36X	40	1		[REQUIRED]	[REQUIRED]
37B	35	1		[REQUIRED]	[REQUIRED]
37H	21	1		[REQUIRED]
37P	32	1		[REQUIRED]	[REQUIRED]
37X	19	1		[REQUIRED]	[REQUIRED]
40X	31	1		[REQUIRED]	[REQUIRED]
48X	26	1		[REQUIRED]	[REQUIRED]	[REQUIRED]
ISONAS Prox	43	1		[REQUIRED]
ISONAS HID	22	1	[REQUIRED]
EV2	29	1		[REQUIRED]
Keypad		2		[REQUIRED]
Isonas Mobile		3		[REQUIRED]
Schlage Mobile		4		[REQUIRED]	110000	20

Importing Users into Pure Access Cloud (non-Engage tenant)

Importing Users into Pure Access Manager

Was this helpful?