Custom Rules

Custom Rules provide the ability to set IF, THEN actions in the system. This feature allows you to script a process to trigger the desired response to a specific event/action.

You will be allowed to choose if an action/event occurs to a specific door, person, or during a shift, then a follow up event will be triggered.

Example:

If you want doors on your system to go into lockdown by pressing an auxiliary button, you can set up the following custom rule:

The IF action would be “An AUX input is triggered” + “At a particular door/group of doors”, then the DO action would be “Lock down a specified door/group of doors.”

!Custom Rule functionality requires an active connection to the Pure Access software. If an ISONAS device is offline or disconnected, custom rules associated with this device will not be triggered.